How to upgrade WAD-110 and WAD-120 servers for Stereo/Mono option

This upgrade instruction in only relevant to WAD-110 and WAD-120 servers that were released prior to May 4, 2015.

1. Download the WAD Upgrade file from 20150504upgrade.zip.
Unzip the file and find within the 3 following files:

ccastd
wadcaster
wadcaster.ksp

2.
Copy the 3 files to a root directory of a flash drive. The 3 files should be outside of any folders in the flash drive.

3.
Connect the WAD server to an external monitor/TV using a HDMI cable. The HDMI port is at the back side of the WAD server.

4.
Boot up the WAD server. You will see the following prompt on the monitor.

>wadsvr login:

5.
Connect the flash drive and a USB Keyboard to the WAD server.

• WAD-110 (Connect the flash drive & the keyboard to front USB Ports)
• WAD-120 (Unplug 2 USB cables coming from the ADC-20 unit to the back of the WAD server. Connect the keyboard and the flash drive instead)

Upon connecting the flash drive, you will see the following messages on the monitor:

[5550.546576] sd 6:0:0:0: [sdb] No Caching mode page present
[5550.546648] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[5550.546576] sd 6:0:0:0: [sdb] No Caching mode page present
[5550.546648] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[5550.546576] sd 6:0:0:0: [sdb] No Caching mode page present
[5550.546648] sd 6:0:0:0: [sdb] Assuming drive cache: write through

6.
Type CTRL+ALT+F2 followed by Enter. You will be the following prompt:

root@wadsvr:/#

7.
Type in the following commands at the prompt and press Enter after each command

• mount /dev/sdb1 /mnt
• killall ccastd
• killall wadcaster
• cp /mnt/ccastd /var/wad
• cp /mnt/wadcaster /var/wad
• cp /mnt/wadcaster.ksp /var/wad

8.
Remove the flash drive and the keyboard from the WAD server. Reconnect the USB cables from the ADC-20 unit.
Reboot the WAD server.

END: The Upgrade has been completed.

Category: WAD-120 and WAD-110 Servers