FAQ: WAD

WAD-120 and WAD-110 Servers

This upgrade instruction in only relevant to WAD-110 and WAD-120 servers that were released prior to May 4, 2015.

1. Download the WAD Upgrade file from 20150504upgrade.zip.
Unzip the file and find within the 3 following files:

ccastd
wadcaster
wadcaster.ksp

2.
Copy the 3 files to a root directory of a flash drive. The 3 files should be outside of any folders in the flash drive.

3.
Connect the WAD server to an external monitor/TV using a HDMI cable. The HDMI port is at the back side of the WAD server.

4.
Boot up the WAD server. You will see the following prompt on the monitor.

>wadsvr login:

5.
Connect the flash drive and a USB Keyboard to the WAD server.

• WAD-110 (Connect the flash drive & the keyboard to front USB Ports)
• WAD-120 (Unplug 2 USB cables coming from the ADC-20 unit to the back of the WAD server. Connect the keyboard and the flash drive instead)

Upon connecting the flash drive, you will see the following messages on the monitor:

[5550.546576] sd 6:0:0:0: [sdb] No Caching mode page present
[5550.546648] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[5550.546576] sd 6:0:0:0: [sdb] No Caching mode page present
[5550.546648] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[5550.546576] sd 6:0:0:0: [sdb] No Caching mode page present
[5550.546648] sd 6:0:0:0: [sdb] Assuming drive cache: write through

6.
Type CTRL+ALT+F2 followed by Enter. You will be the following prompt:

root@wadsvr:/#

7.
Type in the following commands at the prompt and press Enter after each command

• mount /dev/sdb1 /mnt
• killall ccastd
• killall wadcaster
• cp /mnt/ccastd /var/wad
• cp /mnt/wadcaster /var/wad
• cp /mnt/wadcaster.ksp /var/wad

8.
Remove the flash drive and the keyboard from the WAD server. Reconnect the USB cables from the ADC-20 unit.
Reboot the WAD server.

END: The Upgrade has been completed.

How to setup Routers and Access Points

Following attachment in PDF shows how to setup multiple Ruckus ZF7372 Access Points to a WAD server. Here we demonstrate using a WAD-104 server.
How to setup multiple Ruckus ZF7372 Access Points to a WAD server – Part 2

Following attachment in PDF shows how to setup a Ruckus ZF7372 Access Point to a WAD server. Here we demonstrate using a WAD-104 server.
How to setup a Ruckus ZF7372 Access Point to a WAD server

Following attachment in PDF shows how to setup a router to a WAD server. Here we demonstrate using a TP-Link router and a WAD-104 server.
How to setup a router for WAD server

Following attachment in PDF shows how to connect a TP-Link WR740N router to a WAD server. Here we demonstrate using a WAD-104 server.
How to setup TP-Link WR740N router to a WAD server

Google Chrome has been known to cause problems when trying to enter into the administration page of Ruckus ZF7372 Access Point. Use the MS Edge or Internet Explorer version 11 or higher instead.

For detail instruction on how to access the administration page of Ruckus ZF77372, refer to the following link.
How to setup a Ruckus ZF7372 Access Point to a WAD server

Load More